Updated version of the most popular MINI2440, 405MHz arm9 with 3.5" LCD and integral touch panel. With 64MB SDRAM, 2MB Nor Flash, 128MB Nand Flash, 100M ethernet, two USB, one serial port, audio I/O, SD card slot supporting up to 32GB SD/MMC card, WinCE and Linux Operating system, the MINI2440 family is more like a Micro computer on chip.
Now on the MINI2440v2, with the improved LCD connector and ATMEL ATMega48PA MCU, we can control the back light of the LCD easily, we can even add devices like buttons, sensors, etc. to the screen without the necessity to wire them back to the MINI.
| Specification | MINI2440v2 with 7" LCD |
| CPU | S3C2440A |
| MHz | 400-533 |
| RAM | 64MB |
| NOR flash | 2MB |
| Nand Flash | 128MB |
| Ethernet | 10/100M Ethernet with DM9000, RJ45 connector |
| Serial ports | 3 |
| RS232 | 1 |
| USB Host | 1 |
| USB Device | 1 |
| SD card slot | 1 |
| Audio Interface | In, Out |
| LCD connector | 1 |
| Camera Interface | 1 |
| JTAG | 10pin JTAG connector |
| Bus | 40pin 2.0mm-pitch connector |
| GPIO | 34pin 2.0mm-pitch connector |
| RTC | on-board real time clock, battery backed |
| Dimension | 100x100mm |
| Linux | Open Embeddeed with Ångström |
| WinCE | WinCE 5.0 |
| Cost | €137 |