SKY2440-v2 with 7" LCD

SKY2440-v2 with 7" LCD
  • Consultation for product:  SKY2440-v2 with 7" LCD
  • Your name:
  •  
  • Your email adr.:
  •  
  • Your question:
  •  
  • Visual proof:
  •  

Information HowTo

Brief introduction 

The SKY2440-v2 evaluation board consists of two parts, one 6-layers core board and one 4-layers base board. The core board embodies the most popular ARM9 microcontroller Samsung S3C2440, 1x64M Nand Flash, 1x2M NorFlash and 2x32M SDRAM. The base board has 3 serial ports, 1 100M ethernet chip, USB interfaces, audio I/O interfaces, SD card slot, camera interface, GPIOs, RTC, etc..

With low power consumption, stable wire-ways and the powerful Samsung S3C2440 microcontroller, the SKY2440-v2 makes itself a powerful machine for various of applications. It has been widely used on car satellite navigators, GPS, GIS platform, data servers, VOIP, intelligent terminal, PDA hand-held devices, industrial controlling equipments, consumer electronics, security monitors, etc..

Product Specification


Specification SKY2440-v2 with 7" LCD
NOR flash2MB
Nand Flash128MB
CPUS3C2440A
RAM64MB SDRAM
Ethernet10/100M Ethernet with DM9000, RJ45 connector
Serial ports3
RS2321
USB Host1
USB Device1
SD card slot1
Audio InterfaceIn, Out
Camera Interface1
LCD connector2
JTAG10pin JTAG connector
Bus40pin connector
GPIO40pin connector
LinuxLinux 2.6.30
WinCEWinCE5.0
RTCon-board real time clock, battery backed
LCD moduleHiteg 7" MegaDisplay
MHz400-533
Dimension105 x 128 mm
Cost €185